Loading... Please wait...
Blog
Staining a veneer sheet to blend the heartwood and sapwood. Selective staining of a veneer sheet. Using Oil Based Stains On Wood Veneers.
Q. I'm refinishing and re veneering a table. I plan to stain my veneer sheet with an oil based stain. Will the contrast of the heart and sapwood be blended out or reduced? That would be my preference, if not, can I accomplish that with selective staining.A. I would not try to do selective staining of [...]
Refinishing and re veneering kitchen cabinets with pre stained veneers. Refinishing and re veneering kitchen cabinets with pre varnished veneer. Pre finished and pre stained wood veneers, wood backed, paper backed, with or without PSA adhesive
Q. I'm going to be refinishing and re veneering my kitchen cabinets with your PSA peel and stick hickory veneer. Can I pre-stain and varnish the veneer sheets before re veneering my cabinet surfaces? Can I pre-stain and varnish both the paper backed veneer and the wood backed veneer? Can I pre-stain and varnish the veneer sheets if the [...]
Reveneering Cabinet Doors, Reveneering cabinet doors with peel and stick veneer, How To Mitigatte Blotchiness by Reveneering Cabinet Doors,
Q. I have several veneered cabinet doors that need to be refinished or reveneered. The doors have areas that are “blotchy”.Can I re stain or refinish the doors to make them look more uniform (not blotchy)? I’m sending several photos of my veneered doors for you to check out.A. Your cabinet doors are showing unusually bold, dramatic differences [...]
2' x 4' Wood Veneer Sheet, 2' x 8' Wood Veneer Sheet
Q. Hey Bob, I need a 2' x 4' sheet of veneer. Do you have veneer in a 2' x 4' size?A. 2' x 8' is the smallest size.Silver lining (LOL) - You can make a mistake, and you will have enough veneer to start all over again!Regards,Bob Morgan, PresVeneer Factory Outlet.comWood Veneer Factory Outlet.com
Gluing wood veneer with heat activated PVA glue. Gluing 3/64"thick 2 ply wood veneer with heat activated PVA glue and a home iron.
Q. I'm interested in the 3/64ths thick with wood backer in cherry face cut. Can I use wood glue on the backside of the veneer as well as the wood substrate. I would let both surfaces dry, then bond the veneer to the substrate with home iron heat. I've successfully used this process before and [...]
How To Veneer A Tiger Oak Table Top. Tiger Oak Veneer. Laying Out The Tiger Oak Veneer For A Table Top.
Q. I have a very old tiger oak veneer table. I have already removed the tiger oak veneer off of the table top. The tiger oak veneer was Super damaged. The tiger oak veneer pattern seemed to have all sorts of different patterns, so I'm not sure which tiger oak veneer pattern to pick. What should I do?The tiger [...]
Wood Veneer Samples. 12-1/2" x 9-1/2" Wood Veneer Samples in Walnut Veneer, Red Oak Veneer, Maple Veneer, Cherry Veneer, White Birch Veneer, and Teak Veneer
Q. "Do you sell wood samples? I need to experiment with staining and finishing wood veneers.A. Yes, we sell wood veneer samples in paper backed veneer, in 12-1/2" x 9-1/2" sheets. The wood veneer samples that we offer are as follows:Walnut Veneer Sample 12-1/2" x 9-1/2" paper backed veneerRed Oak Veneer Sample 12-1/2" x 9-1/2" [...]
Staining Wood Veneers, Matching The Color Of Wood Veneers With Stains, How To Apply Wood Veneer To MDF Sheets
Q. I am attempting to find walnut veneer that matches my coffee table and media console/tv stands. I'm trying to find a veneered MDF sheet with a veneered surface that matches the photo that is attached. Can you supply a veneered MDF sheet? Do you supply walnut veneer that matches my photos?If you would, please take a [...]
Can paper backed veneer bend around a 90 degree angle?
Q. "Can the paper backed veneer bend around a 90 degree corner?"A. The paper backed veneer is flexible, but not flexible enough to bend around a 90 degree angle.Regards,Bob MorganVeneer Factory OutletWood Veneer Factory Outlet
Using a backer veneer for the underneath of a table top. Why you need to use a backer veneer on the back side of a substrate.
Q. "What is a good backing veneer for underneath a table top?" "Why do I need a backing veneer?"A. Any veneer that is similar in thickness and construction to the face veneer is suitable. It isn't important for the backer veneer to be the same species. It can be an inexpensive species, even with a [...]
Recent Posts
- » How to join veneer sheets end to end to get long lengths without noticeable seams.
- » Veneering and Exterior Door, Will a re veneered exterior door hold up to the elements?, 2 ply wood backed veneer for re veneering an exterior door
- » Do I Need To Veneer Both Sides of a substrate? Veneering Only One Side Of a Substrate is Risky.
- » Veneering an Exteror Door, Mounting a veneered sheet of plywood to an exterior door, Using peel and stick veneer on an exterior door
- » Veneering a table toAre Veneer sheets rolled up for shipping? Should I try to duplicate a veneer pattern on a table top?