Loading... Please wait...
Veneering a surface with dents and dings. How to smooth out a dented surface before applying veneer. Easy way to fill a dented dented surface before veneering it.
Posted by Bob Morgan, Pres. Veneer Factory Outlet, Wood Veneer Factory Outlet on 5th Apr 2023
Q. I'm veneering a table top that has dents and gouges in the surface. Is there an easy way to fill the dents and gouges in the table top before I apply the veneer?
A. Get some Bondo from an automotive store. fill as needed and sand smooth. Then apply 2 or 3 coats of paint or varnish.
I suggest that if you have an uneven or dented surface, you should use the 2 ply wood backed veneer. The 2 ply wood backed veneer is sturdier and it is much less likely to telegraph the dents than the paper backed veneer, which is thinner.
Regards,
Bob Morgan, pres.
www.wood-veneer-factory-outlet.com
Recent Posts
- » How to join veneer sheets end to end to get long lengths without noticeable seams.
- » Veneering and Exterior Door, Will a re veneered exterior door hold up to the elements?, 2 ply wood backed veneer for re veneering an exterior door
- » Do I Need To Veneer Both Sides of a substrate? Veneering Only One Side Of a Substrate is Risky.
- » Veneering an Exteror Door, Mounting a veneered sheet of plywood to an exterior door, Using peel and stick veneer on an exterior door
- » Veneering a table toAre Veneer sheets rolled up for shipping? Should I try to duplicate a veneer pattern on a table top?